Re-Vent Air FAQ

Indoor air quality – or IAQ as it is commonly known, refers to the measurement and management of the air within our built environments. Typically, most of us spend up to 90% of our day indoors. And studies have shown the air to be 2-5x worse indoors than outdoors with the global trend to being more aware of both our health and the environment, along with the Covid 19 pandemic, wildfires, sandstorms, IAQ has been thrust into the limelight as something we need and want to measure and manage. After all we measure everything else from the amount of steps we take a day to calories we burn, how much more important is the very air we breathe into our bodies!

Well, firstly and foremostly it is about our Health. The immediate and long-term impacts of poor air quality are in some cases only just being realized. Immediate effects can include uncomfortableness, headaches, drowsiness, and a less safe environment for transmission of viruses, also leading to inefficiencies in workplace through reduced cognitive ability. Long term effects can include onset and aggravation of many respiratory ailments such as asthma. Suffice to say the effects can no longer be considered minor, and knowing what is in the air we are breathing is important for everyone to feel safe. Environmental efforts are moving globally to reduce emissions and focus on clean air for ourselves and future generations, however right now many of these pollutants can be finding there way indoors into the air we breathe.

The below list is not exhaustive but covers of some of main areas we look at when measuring IAQ. These apply to all areas indoors, whether it be home, office, workplace, school, university, healthcare or retail. While some specific workplaces have particular dangers that need to be addresses (such as monoxide). · Temperature. Let’s start with the basic one, however often underestimated. There are two key reasons we need to focus more on keeping temperature right,1) Comfort. We all know how being too hot or too cold affects our mood and effectiveness, so having a constant comfortable temperature is a basic must. 2) Efficiency. More about this later but consistently holding a building too hot or too cold with manual HVAC is very inefficient and huge cost savings can often be realized for landlords and tenants by measuring and managing this simple measure. · Humidity. Humidity is a measure of the amount of water vapor in the air. Relative humidity measures the amount of water in the air in relation to the maximum amount of water vapor (moisture). The higher the temperature, the more water vapor the air can hold. Excess humidity can result in aggravation of respiratory illness, mold growth and dampness. Low humidity can cause worsening of itchiness dry skin and eczema. · CO2 – if you are reading this chance are you are all over the effects of increased CO2 in our indoor spaces. CO2 Carbon dioxide is in the air we breathe out while we are breathing, and our bodies are using the fresh clean oxygen in the air to survive. As the CO2 in a room increases the oxygen effectively decreases so we can use CO2 as a measure of how much fresh air there is in a room. Increased levels of CO2 have been linked with an increase in transmissibility of viruses – see video on our homepage https://www.re-ventair.co.nz/ , however one of the lesser know effects of high CO2 levels is the reduction of cognitive ability. We all know what it is like to be stuck in a boardroom with not enough fresh air, and that feeling of relief when you get outside, breath in the fresh air and feel immediately better. Well, studies have shown that high CO2 levels can result in up to a 50% reduction in cognitive ability. This is important when we are talking about classrooms and workplaces and has direct impact on productivity and efficiency. · PM – Particulate Matter. Particulate matter is a kind of air pollutant and is almost invisible. Particulate matter is a complex mixture of solid and/or liquid particles suspended in air. Fine particles that can cause harm and discomfort to our body including respiratory system. Particulate matter is classified into o PM10 (less than 10 μm), and o PM2.5 (less than 2.5 μm) and o PM1 (less than 1 μm), according to its diameter. PM2.5 and smaller can be reached into the lower airway and can cause damages into lower respiratory illness. It has also been found that once inhaled, particles can affect heart and lungs and, in some cases, cause serious health effects. https://www.epa.gov/indoor-air-quality-iaq/indoor-particulate-matter

Thankfully along with increased awareness and concern around indoor air quality has come the development and production of affordable and smart monitoring devices. 10 years ago, air quality monitoring was the domain of specialists with highly expensive equipment who came in to do spot checks on your environment. Obviously, this is not ideal as environments change and this in no way gives a picture the overall health of a building. Wireless devices now able us to report on IAQ 24/7 and upload data which can be reviewed as graphs over time, allowing a clear picture of how healthy your environment is. And as these devices are measuring constantly, they can also alert you if something reached dangerous levels, such as High PM or high CO2 so you can take immediate corrective action.

The whole purpose of measuring IAQ is to measure and improve. There are many benefits, but here are 3 main ones. 1. More productive. Families/office staff and workers operating in clean fresh air environments are way more creative, efficient, and productive. 2. Healthier. Staff have fewer sick days and more inclined to come into the office or classroom. They feel safe and enamored knowing you care about their health and welfare. 3. More efficient. Healthy buildings that are carefully monitored and ventilated by intelligent smart sensor solutions can save thousands in HVAC costs every month.

The key thing to remember here is that the devices are exactly the same in the terms of what they measure and how they measure it. They have the same display. The key difference is connectivity. Aranet4 HOME has Bluetooth connectivity only, allowing it to pair within bluetooth range to the Aranet smart APP for reading and controlling, or the Aranet Display APP - great for showing in a public space on a tablet. Devices can connect to multiple apps and apps can connect to multiple devices. Aranet4 PRO also has Bluetooth connectivity but is also a wireless device, which connects via radio frequency to a base station. The base station has built in free software which can read and record data from up to 100 devices within a 3km range (line of sight) or several hundred metres indoors.

No. Aranet base station comes with free software which can be viewed from a computer on the local network. However if you want to read data from multiple base stations, or view data from anywhere we suggest an Aranet cloud subscription.

See video below

All radio devices supplied by Re-Vent Air have been checked and documented by our Radio Engineer for New Zealand conditions, and as such carry the RNZ mark. We can also supply Sdocs documentation if required. This is important because not all devices manufactured by Aranet are suitable for NZ conditions even though they may look the same.

These are a scientific and technical instrument, and costs cut on the instrument invariably mean one or all of the following o Inaccurate readings due to cheaper sensor types o Readings tracking over time, so a device is correct when manufactured but ‘tracks’ and becomes uncalibrated o Shorter battery life We believe its worth paying for quality instruments, as an unreliable instrument is worse than no instrument. Also, when looking at life cycle cost, the better instruments are very cost effective.